Big Apple Mold Removal


Free Quote - Schdule Appointment


Post Mold Remediation

 The purpose of a Post Remediation Verification Inspection (PRVI) or Mold Clearance Test is to assure that the mold cleanup has been done correctly and effectively in the work area and to confirm that the cleanup did not accidentally distribute high levels of moldy dust and debris into other building areas or into its mechanical systems such as heating or air conditioning systems. 

At the end of the remediation, a PRVI inspector will perform a project clearance inspection combining a visual inspection of the extent of removal and cleaning of infected materials/areas with a microscopic examination of surface, dust, air, and/or vacuum samples collected at the property.
 
Our specially trained PRVI inspector will be responsible making sure that the following is done:
 
Visual Inspection
S/he will make sure that the cleaned area as well all other building areas are completely clean of mold and mildew and fungicidal sealant was applied to cleaned areas.  They will also make sure that all contaminated materials were disposed of properly.
 
Clearance Sampling
S/he will collect swab samples of any physical surface that appears to still be slightly dirty or discolored.  If all surfaces are clean S/he will collect at least one settled dust sample from a cleaned surface in each major area. paying special attention to areas (or equipment such as HVAC systems) which are at particular risk of having been cross-contaminated by inadequate dust containment measures during the cleanup. We will also collect an air sample from the areas that were contained and one from the outside area that was clean before remediation.
 
General Property Condition
S/he will also repot ongoing conditions which may continue to put the building at risk of a new mold problem, such as failure to correct various leaks, clogged gutter, cracks and gaps in exterior of property (etc).
 
Process Clearance Data
After all of the necessary data is accumulated, we will send the samples (swab and/or air) to our laboratory for analysis.  Once we receive the lab results confirming that your property is free of mold, we provide you with a certificate of clearance stating that you are officially a mold free environment.

 
VISUAL INSPECTION
INSPECTION WITH THERMAL IMAGING
MOLD REMEDIATION
CLEARANCE TESTING
WATER DAMAGE RESTORATION
A visual inspection is the most important initial step in identifying a possible mold contamination problem. Infrared Inspection Technology can assist in minimizing damage and repair costs associated Mold Remediation is the process of removal and/or cleanup of mold from an indoor environment. Once we have restored your property, our inspector comes out for a final inspection and clearance test. Water damage restoration is the process of restoring a property back to pre-loss condition after sustaining any level of water damage.